Unlocking Lossless Electronics With an Innovative Quantum “Sandwich”

By ARC Centre of Excellence in Future Low-Energy Electronics Technologies October 15, 2024

Collected at: https://scitechdaily.com/unlocking-lossless-electronics-with-an-innovative-quantum-sandwich/

Researchers have created a cutting-edge structure by placing a very thin layer of a special insulating material between two magnetic layers. This new combination acts as a quantum anomalous Hall insulator, significantly broadening its potential use in developing ultra-efficient electronics and innovative solar technology.

A Monash University-led research team has found that a structure featuring an ultra-thin topological insulator, sandwiched between two 2D ferromagnetic insulators, transforms into a large-bandgap quantum anomalous Hall insulator.

This heterostructure opens the door to ultra-low energy electronics and even topological photovoltaics.

Quantum Anomalous Hall Effect Explained

In this innovative heterostructure, ferromagnetic materials constitute the ‘bread’ of the sandwich, encapsulating a topological insulator—the ‘filling’—known for its nontrivial topology.

The fusion of magnetism and intricate band topology fosters the emergence of quantum anomalous Hall (QAH) insulators and other exotic quantum states, enabling current to flow without loss along quantized edge states.

Inducing magnetic order in topological insulators via proximity to a magnetic material offers a promising pathway towards achieving QAH effect at higher temperatures (approaching or exceeding room temperature) for lossless transport applications.

Advanced Materials for Future Electronics

One promising architecture involves a sandwich structure comprising two single layers of MnBi₂Te₄ (a 2D ferromagnetic insulator) either side of ultra-thin Bi₂Te₃ in the middle (a topological insulator). This structure has been predicted to yield a robust QAH insulator phase with a bandgap well above the thermal energy available at room temperature (25 meV).

The new Monash-led study demonstrated the growth of a MnBi₂Te₄ / Bi₂Te₃ /MnBi₂Te₄ heterostructure via molecular beam epitaxy, and probed the structure’s electronic structure using angle resolved photoelectron spectroscopy.

“We observed strong, hexagonally-warped massive Dirac fermions and a bandgap of 75 meV,” says lead author Monash PhD candidate Qile Li.

The magnetic origin of the gap was confirmed by observing the bandgap vanishing above the Curie temperature, as well as broken time-reversal symmetry and the exchange-Rashba effect, in excellent agreement with density functional theory calculations.

“These findings provide insights into magnetic proximity effects in topological insulators, which will move lossless transport in topological insulators towards higher temperature,” says Monash group leader and lead author Dr. Mark Edmonds.

Experimental Techniques and Findings

The 2D MnBi₂Te₄ ferromagnets induce magnetic order (ie, an exchange interaction with the 2D Dirac electrons) in the ultra-thin topological insulator Bi₂Te₃ via magnetic proximity.

This creates a large magnetic gap, with the heterostructure becoming a quantum anomalous Hall (QAH) insulator, such that the material becomes metallic (ie, electrically conducting) along its one-dimensional edges, whilst remaining electrically insulating in its interior. The almost-zero resistance along the 1D edges of the QAH insulator is what makes it such a promising pathway toward next-generation, low-energy electronics.

To date, several strategies have been used to realize the QAH effect, such as introducing dilute amounts of magnetic dopants into ultrathin films of 3D topological insulators. However, introducing magnetic dopants into the crystal lattice can be challenging and results in magnetic disorder, which greatly suppresses the temperature at which the QAH effect can be observed and limits future applications.

Rather than incorporating 3d transition metals into the crystal lattice, a more advantageous strategy is to place two ferromagnetic materials on the top and bottom surfaces of a 3D topological insulator. This breaks time-reversal symmetry in the topological insulator with magnetic order, and thereby opens a bandgap in the surface state of the topological insulator and gives rise to a QAH insulator.

Optimizing Interface Potential

Yet, inducing sufficient magnetic order to open a sizable gap via magnetic proximity effects is challenging due to the undesired influence of the abrupt interface potential that arises due to lattice mismatch between the magnetic materials and topological insulator.

“To minimize the interface potential when inducing magnetic order via proximity, we needed to find a 2D ferromagnet that possessed similar chemical and structural properties to the 3D topological insulator,” says Qile Li, who is also a PhD student with the Australian Research Council Centre for Excellence in Future Low-Energy Electronic Technologies (FLEET).

“This way, instead of an abrupt interface potential, there is a magnetic extension of the topological surface state into the magnetic layer. This strong interaction results in a significant exchange splitting in the topological surface state of the thin film and opens a large gap,” says Li.

A single-septuple layer of the intrinsic magnetic topological insulator MnBi₂Te₄ is particularly promising, as it is a ferromagnetic insulator with a Curie temperature of 20 K.

“More importantly, this setup is structurally very similar to the well-known 3D topological insulator Bi₂Te₃, with a lattice mismatch of only 1%” says Dr. Mark Edmonds, who is an associate investigator in FLEET.

Empirical Validation at the Lawrence Berkeley National Laboratory

The research team traveled to the Advanced Light Source part of the Lawrence Berkeley National Laboratory in Berkeley, USA, where they grew the ferromagnet/topological/ferromagnet heterostructures and investigated their electronic bandstructure in collaboration with beamline staff scientist Dr. Sung-Kwan Mo.

“Although we cannot directly observe the QAH effect using angle-resolved photoemission spectroscopy (ARPES), we could use this technique to probe the size of the bandgap opening, and then confirm it is magnetic in origin,” says Dr. Edmonds.

“By using angle-resolved photoemission we could also probe the hexagonal warping in the surface state. It turns out, the strength of the warping in the Dirac fermions in our heterostructure is almost twice as large as in Bi₂Te₃” says Dr. Edmonds

The research team was also able to confirm the electronic structure, gap size and the temperature at which this MnBi₂Te₄/Bi₂Te₃/MnBi₂Te₄ heterostructure is likely to support the QHE effect by combining experimental ARPES observations with magnetic measurements to determine the Curie temperature (performed by FLEET associate investigator Dr. David Cortie at the University of Wollongong) and first-principles density functional theory calculations performed by the group of Dr. Shengyuan Yang (Singapore University of Technology and Design).

Reference: “Large Magnetic Gap in a Designer Ferromagnet–Topological Insulator–Ferromagnet Heterostructure” by Qile Li, Chi Xuan Trang, Weikang Wu, Jinwoong Hwang, David Cortie, Nikhil Medhekar, Sung-Kwan Mo, Shengyuan A. Yang and Mark T. Edmonds, 8 March 2022, Advanced Materials.
DOI: 10.1002/adma.202107520